TK CONN - 6 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

  5. P. 5

  6. P. 6

Catalogue excerpts

TK CONNECTION FLUSH MOUNTED TC CONNECTION Hygienic device features a compact design that allow the installation of typical. Clamp-connections on top, bottom or side wall of a tank. Once installed, the clamp gasket shuts off ush with the inside tank wall with a zero dead leg. It gives better CIP/SIP (Cleaning In Place/Sterilisation In Place) performance. Fit for clamped valves, sight glasses, sampling devices, manometer, tank bottom valves. The equipment can be removed and the TK sealed with a standard blind cap. Syringe device on TK connection The TK-Connection consist in: • WELDING FLANGE drainable,...

 Open the catalogue to page 2

Pressure directive: The TK-Connection are designed according to directive PED 97/23/CE for Europe, ASME VIII Div.2 for US and F.E.M. (Finite Element Method) calculated, approved and certi ed by noti ed body. Operating conditions: Design Pressure Design Temperature welding ange locking ring bolts nut ASTM A 479 / ASTM A 182 - 316L ASTM A 479 / ASTM A 182 - 316L ASTM A 193 B8 - 304 ASTM A 194 8 - 304 Surface Finish: Product contact surface are nished to Ra<0,5 mm or better TK-Connection supply include the following documentations: • PED conformity certi cate • welding guideline • 3.1B certi cate...

 Open the catalogue to page 3

TK IN-LINE Fig. 6 TK IN-LINE HOUSING Available with clamped or butt weld ends for pipe standard according to ASTM A269 /270, ISO 1127or DIN 11851. Special extended tube for orbital welding on request. Fig. 7 TK IN-LINE ANGLE HOUSING 90° Angle in-out. Available with clamped or butt weld ends for pipe standard according to ASTM A269 /270, ISO 1127 or DIN 11851. TK IN-LINE THREE WAY HOUSING Three way equal (drain reduct available). Available with clamped or butt weld ends for pipe standard according to ASTM A269 /270, ISO 112 or DIN 11851. Fig. 9 TK IN-LINE DOUBLEX HOUSING In-line version completely...

 Open the catalogue to page 4

ASEPTIC TANK CONNECTION, WITH BOLTED SPLIT RINGS Available in size from ¾” up to 4”, DN10 up to DN100 in four different thikness : std, 25 mm, 38 mm, 51 mm According to ASTM A269 /270, ISO 1127or DIN 11851. Material 1.4404 – 1.4435 – Hastelloy C22 – C276 on request. Designed for use of standard clamp gaskets. According to PED 97/23/CE directive and ASME VIII Div.2 Fig. 2 TK- CONN BLOCK HOUSING For special applications onto tank welding. According to ASTM A269 /270, ISO 1127 or DIN 11851. Material 1.4404 – 1.4435 - Hastelloy C22 – C276 on request. Non-standard product, custom thicknesses, avoids...

 Open the catalogue to page 5

ASEPTIC SAMPLING VALVES SANITARY SAMPLING VALVES SPRING CHECK VALVES HIGH PURITY BALL VALVES SIGH GLASS-FLOW INDICATOR CLAMP FITTINGS MAGNETIC MIXER REPLACEMENT DIAPHRAGMS SANITARY SAMPLING BOTTLE BUTTERFLY VALVES TANK CONNECTIONS TANK BOTTOM ASEPTIC VALVE SILICONE HOSE & FITTINGS ROTATIVE SPRAY HEAD AERRE INOX s.r.l. Via Gerola 4 I-26010 Fiesco (Cremona) Tel. +39.0374.370.828 - Fax +39.0374.370.833 www.aerreinox.it Get the information you need and more at info.aerreinox.it

 Open the catalogue to page 6

All AERRE INOX Srl catalogues and technical brochures

  1. TK Luminaire

    1 Pages

    En