AMT Magnetic Mixer - 4 Pages

  1. P. 1

  2. P. 2

  3. P. 3

  4. P. 4

Catalogue excerpts

Quality System Certified ISO 9001 AMT Magnetic Mixer technical sheet Rev.7.doc Page 1 of 4 - speed range 50 to 380 rpm using an inverter. Depending on the size of vessel and impeller-head, levels of agitation can change from vigorous to gentle. Small volumes can be achived. - all product contact part are made in 1.4435 or 1.4404 The impeller head runs on a special grade tungsten carbide that has been manufactured under controlled conditions to achieve the correct size, grain structure and hardness. - the blade shape and profile has been designed to optimize agitation levels and to direct a proportion of the cleaning fluid through the head. • The mixing capacities above are based on aqueous like products with a density of 1.000 Kg/m3 and a viscosity of 1cp. • Typical applications for “Gentle mixing” are where solid are held in suspension or where powders easily dissolve into the liquid. • Typical applications for “Vigorous mixing” are where a vortex is required for blending of powders into a liquid. Aerre Inox s.r.l. 26010 FIESCO Via Gerola n.4 -CREMONA - Italy Tel. +39. 0374. 370828 Fax +39. 0374. 370833 e-mail : info@aerreinox.it http : www.aerreinox.it

 Open the catalogue to page 1

Quality System Certified ISO 9001 AMT Magnetic Mixer technical sheet Rev.7.doc Page 2 of 4 Weld plate Impeller Static bearing Dinamic bearing O-Ring Surface roughness design pressure design temperaure in compliance with MATERIAL WETTED PARTS stainless steel AISI 316L- 1.4404 or 1.4435 stainless steel AISI 316L- 1.4404 or 1.4435 tungsten Carbide tungsten Carbide FDA and USP Class VI Ra<0,5 micron or better manually polished or manually polished + electro polished -1 to +10 bar(g) -80 to +200°C the weld plate is classified in Europe, for the weld plate is classified in Europe, for PED Directive...

 Open the catalogue to page 2

Quality System Certified ISO 9001 AMT Magnetic Mixer technical sheet Rev.7.doc Page 3 of 4 Item code Thk : to be defined on purchase order Surface roughness:    Ra<0,5 micron or better, manually polished or manually polished + electro polished Material:    stainless steel AISI 316L- 1.4404 or 1.4435 for round bar and blade plates, static female and dinamic male bearings in tungsten Carbide In Compliance with:    the weld plate is classified in Europe, for PED Directive 97/23/EC Category IV and approved by Notified Body Non-standard executions available on request: Welding plate with bigger different...

 Open the catalogue to page 3

Quality System Certified ISO 9001 AMT Magnetic Mixer technical sheet Rev.7.doc Page 4 of 4 Available options in order to accommodate specific customer requests • Welding plate with bigger different thickness, •    Shaft extension for vessel with jacket or thermal insulation •    Proximity speed sensor • Dismounting system for magnetic coupling •    Drive unit Atex execution •    Pneumatic drive unit •    Axial gear box for RPM increase •    Stainless steel drive unit •    Elecropolish impeller •    Silicon carbide bearings Dismounting system for magnetic coupling to take off the impeller without...

 Open the catalogue to page 4

All AERRE INOX Srl catalogues and technical brochures

  1. RSH

    6 Pages

    En
  2. Butterfly valve

    6 Pages

    En
  3. SP-SL

    6 Pages

    En
  4. TK CONN.

    6 Pages

    En
  5. VSS

    6 Pages

    En
  6. SSB

    6 Pages

    En
  7. VA-VFA.

    6 Pages

    En
  8. RPS-16

    6 Pages

    En
  9. VPK-16

    6 Pages

    En
  10. 13MHH clamp

    1 Pages

    En
  11. 13MHH 316 clamp

    1 Pages

    En
  12. TC

    11 Pages

    En
  13. MM

    6 Pages

    En
  14. TK Luminaire

    1 Pages

    En
  15. TK CONN

    6 Pages

    En