BEAM LEVEL Fixed at 6 dB above the preamble; Accuracy ±2 dB BEAM WIDTH AZ, BAZ and EL: 1.0° HiAZ: 3.0° Accuracy ±10% (measured at the -3 dB point) ANGLE OFFSET Azimuth: ±40° in 10° steps Elevation: +1 to +10° in 1° steps Accuracy ±0.1° CLEARANCE PULSE Levels CLR L: +6 dB LEFT PULSE and -4 dB RIGHT PULSE CLR R: -4 dB LEFT PULSE and +6 dB RIGHT PULSE Width 1/2 Beam plus Clearance Pulse at -3 dB point (75ìs) Position Pulse fixed at ±12.5° (Pulses fixed at -12.5° left and +12.5° right) DEFLECTION Center 0% Full Scale Deflection (FSD) Accuracy: ±0.1° Full 100% FSD (left and right 3.2 degrees Azimuth) Standard 52% FSD Control Motion 7% FSD SLEW Slew Rate 0.0, 0.05, 0.1, 0.5 and 1.0° per second Accuracy ± 0.05° per second GENERAL Operating Temperature -40° C to +55° C Storage Temperature -40° C to +71° C Battery Four hour battery operation with 15 minute time-out following the absence of switch operation AC Selectable VAC operation used to recharge the battery and operate the industrial test set; 103.5 to 129 VAC or 207 to 253 VAC, 47.5 to 420 Hz, 50 W Dimensions 343 mm wide, 368 mm deep, 209 mm high 13.5 in. wide, 14.5 in. deep, 8.25 in. high Weight 13.5 kg (30 lbs.) approximately VERSIONS AND ACCESSORIES When ordering please quote the full ordering number information. Ordering Numbers Versions 801 MLS-801 Microwave Landing System RampTest 801-C MLS-801 Microwave Landing System Ramp Test with Certificate of Calibration All IFR Avionics products delivered with Factory Certificate of Calibration