You may also be interested in
Protocol analyzer, Signal analyzer, Chassis, Digitizer, Frequency counter
Text version of the page
For the very latest specifications visit www.aeroflex.com
Variable
Range
1 to 15 KHz (1 KHz steps)
Distortion
<5% in CAL position
SSB MODULATION
USB/LSB offset carrier
SELCAL MODE
Provides amplitude modulation with SELCAL (SELective CALling) tones
SELCAL TONE FREQUENCY ACCURACY
± 0.02%
TRANSMIT MODES
Single
single transmission
Continuous
7.5 sec interval (typical)
MODULATION
CAL
Per SELCAL Tone
40% AM
Accuracy
±2% modulation
Variable
Range
0% to 55% AM
Distortion
<2.5% in CAL position
EXTERNAL FREQUENCY COUNTER
FREQUENCY RANGE
Antenna and RF I/O Connectors
Range
10 to 400 MHz
Resolution
100 Hz
Accuracy
Same as time base, ±1 count
AUX I/O Connectors
Range
1 to 10 MHz
Resolution
1 Hz
Accuracy
Same as time base, ±1 count
SENSITIVITY
ANT Connector
-35 dBm
RF I/O Connector
0 dBm
AUX I/O Connector
1 Vp-p (from a 50 ohm source)
POWER METER (RF I/O CONNECTOR)
FREQUENCY RANGE
10.0 to 400.0 MHz
POWER RANGE
0.1 to <1 W
Resolution 0.01 W
1 to <100 W
Resolution 0.1 W (NOTE 1)
100 to 1999 W
Resolution 1 W (NOTE 1)
Accuracy
<100 MHz
±12% of reading, ±1 count, CW only (NOTE 2)
100 to 400 MHz
±8% of reading, ±1 count, CW only (NOTE 2)
DUTY CYCLE
10 W, continuous
>10 W to 20 W, 3 min on, 2 min off
>20 W to 30 W, 1 min on, 2 min off
AM METER
Audio Range
50 to 3000 Hz
Percent Modulation Range
10% to 99%
Accuracy
±10% of reading
Sensitivity
Antenna Connector
-20 dBm
RF I/O Connector
+15 dBm
FM METER
Audio Range
50 to 3000 Hz
Deviation Range
1 to 15 kHz
Accuracy
±(0.4 kHz + 8% of reading)
Minimum Input Level
Antenna Connector
-35 dBm
RF I/O Connector
0 dBm
|
|