Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX - #1

/ 4


catalogue search
Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX
P. 01
Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX
P. 02
Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX
P. 03
Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX
P. 04
Pages:
Aeroflex DT400 ARINC 429 Databus Analyzer - AEROFLEX


See other catalogues for AEROFLEX
You may also be interested in

Test system, Signal generator, Analyzer, Chassis, Testing machine


Text version of the page
For the very latest specifications visit www.aeroflex.com Sets a standard for databus test equipment in the field or shop Avionics DT400 ARINC 429 DATABUS ANALYZER The DT400 clearly establishes the standard for databus equipment. Never have so many powerful tools and features been assembled for supporting your digital avionics. Data may be read from up to four buses and displayed in every format you might conceive including graphic plots. Using the DT400's many diagnostic functions adopted from the most sophisticated logic analyzer systems, it is now much easier to isolate troublesome intermittent data. A suspect LRU can be monitored for hours with a breakpoint condition programmed to capture and display fault information. BITE mode provides a very effective tool for interrogating maintenance data from ARINC 604 avionics. Equipment menus may be read, allowing the user to select and view present fault data, and recall flight data or generate a self test. You may even use the DT400 to record fault messages for later viewing or downloading. Here are some of the DT400's powerful features: FEATURES • Up to four receive and four transmit ports • Displays ARINC 604 BITE messages • 16-channel data recorder • RS-232C and DAC ports for download and conversion • Sophisticated analyzer features including breakpoint, history, etc. • Eight display formats including engineering units and graphic plots • Dynamic transmit patterns • User defined labels and transmit tables GENERAL SPECIFICATIONS RECEIVER OPERATION Ports 2 standard, expandable to 4 with additional board Bus Frequency 12-14.5 kHz or 100 kHz (selectable) Input Levels ±6.5 VDC to ±13.5 VDC (A to B) Input Impedance 12.0 kŮ Word Update 1 ms to 10 sec, update rate displayed as instantaneous, min or max value Display Format Pre-stored engineering units, full or data field hex and binary, user, ASCII, and graphic plots Maximum Words 256 per SDI per channel Bus Activity Monitor Monitors loss of individual words; sensitivity selectable Real-time Download/Conversion RS-232C or 12-bit DAC port TRANSMITTER OPERATION Ports Two standard, expandable to four with additional board

pageCatalog pdf di En 2012-02-07-16