| | | • Wide frequency coverage 30 kHz to 46 GHz • Power levels from: -70 dBm (100 pW) to +44 dBm (25 W) •50 fi and 75 fi sensors • Low VSWR reduces measurement uncertainty • Linearity correction data supplied • Field replaceable RF assembly • High overload capability These stable and accurate power sensors operate at frequencies up to 46 GHz. They are for use with the 6960B and 6970 Power Meters as well as the CPM 20, 46 Counter Power Meter and the 6200B series Microwave Professional test set. | | High Measurement Accuracy High measurement accuracy over a wide frequency range is ensured by low input VSWR - the result of innovative design. Fully Interchangeable The sensors are fitted with precision suppliers of connectors. They have a mul-tiway socket for cable connection to the Power Meter, and are interchangeable. Small and Lightweight The small size and light weight of these sensors makes them very adaptable for use anywhere without requiring additional mechanical support. Rugged Construction Rugged mechanical construction makes them ideal for both bench and field use. Minimum down-time is ensured by using a pre-cali-brated field replaceable RF sensing assembly. Unit lifetime is enhanced by high overload capabilities. Seventeen different sensors are currently available covering a range of frequencies from 30 kHz to 46 GHz. Type N, APC-7, MPC 3.5 and 2.92 mm connectors are available from -70 dBm (100 pW) to +44 dBm (25 W). A 75 fi sensor is also available. For the 40 GHz sensors (6914, 6924 and 6934) a waveguide 22 transformer is optionally available. By ordering version '/002' the transformer (54417/002) is supplied as well as a calibration table to give both accurate waveguide and coaxial measurements. The calibration information is traceable to national standards. | | |