Aeroflex 3410 Series Signal Generators - AEROFLEX - #5

Text version of the page

For the very latest specifications visit www.aeroflex.com Output VSWR Electronic Attenuator For output levels <0 dBm FrequencyOutput VSWR 2 GHz <1.25:1 3 GHz <1.40:1 4 GHz <1.50:1 6 GHz <1.60:1 For output levels >0 dBm VSWR is <1.5:1 4 GHz, <1.8:1 6 GHz Mechanical Attenuator For output levels <0 dBm FrequencyOutput VSWR 3 GHz 1.33:1 For output levels >0 dBm VSWR is <1.5:1, 3 GHz No Attenuator FrequencyOutput VSWR 4 GHz <1.5:1 6 GHz <1.8:1 Attenuator Repeatability Mechanical attenuator typically 0.1 dB Output Connector Front panel 50 Ù type N female to MIL-PRF-39012 class 2 Output Protection Protects the instrument from externally applied RF power (from a 50 Ù source) of 50 W up to 3 GHz and 25 W up to 4 GHz The RPP trip may be reset from the front panel or via the remote interface. For safety, the protection is also provided when the instrument is switched off. 3416 damage level 0.5 W (+27 dBm) from a max 5:1 VSWR, all frequencies SPECTRAL PURITY Harmonics <-30 dBc, typically <-40 dBc for output levels +7 dBm Sub- and Non-Harmonics For offsets >10 kHz <-70 dBc for carrier frequencies 3 GHz <-60 dBc for carrier frequencies 6 GHz Residual FM (FM on CW) <2.5 Hz RMS (typically 1.5 Hz) at 1 GHz in a 300 Hz to 3.4 kHz unweighted bandwidth Typical Residual FM Typical SSB Phase Noise, phase noise optimized >10 kHz offset Typical SSB Phase Noise at 1 GHz, phase noise optimized <10 kHz offset SSB Phase Noise For 20 kHz offset, Noise Optimized mode CW/IQ 375 MHz <-115 dBc/Hz 500 MHz <-124 dBc/Hz 1 GHz <-118 dBc/Hz 2 GHz <-112 dBc/Hz 3 GHz <-108 dBc/Hz 4 GHz <-106 dBc/Hz 6 GHz <-102 dBc/Hz Typical SSB Phase Noise Performance at 20 kHz Offset, phase noise optimized >10 kHz offset