Aeroflex 3010/3011 PXI RF Synthesized Signal Generators - AEROFLEX - #2

Text version of the page

High Stability Frequency Reference Variant: The 3010 RF synthesizer is supplied for use with either an internal VCXO frequency standard or an external 10 MHz frequency reference. The high stability variant, 3011 is fitted with an OCXO 10 MHz frequency reference. In this case it is also available as an output for connection to other PXI modular instruments such as 3020 and 3030. Software The 3010 and 3011 are supplied with a VXI PNP Driver and soft front panel. Customer Support. Users can elect to purchase PXI modular instrument with optional warranty extensions. Standard Extended Warranty provides either 36 months or 60 months warranty period plus the benefits of guaranteed product repair times in the event of failure. Standard Extended Warranty can also be provided inclusive of scheduled calibration. On request Aeroflex can provide customized Premium Warranty support designed around your specific needs. SPECIFICATION All specifications are common to 3010 and 3011 unless otherwise stated RF OUTPUT Frequency Range 1.5 GHz to 3.0 GHz Resolution 1 Hz Accuracy As frequency standard Output Power Fixed level in the range -4 dBm to +3 dBm Output Impedance 50 Ù Nominal VSWR <2:1 SPECTRAL PURITY Phase Noise (typical at 2 GHz and at ambient room temperature) Loop Bandwidth Narrow Wide (normal) Offset dBc/Hz dBc/Hz 100 Hz -55 -85 1 kHz -85 -103 10 kHz -114 -103 20 kHz -116 -110 100 kHz -133 -130 1 MHz -140 -140 10 MHz -146 -146 Phase noise below 100 Hz is dependent upon reference phase noise. FREQUENCY SETTLING TIME Time taken to be within 1 kHz of final demanded frequency Normal Loop Bandwidth As standard: Typically 1.1 ms With option 01 fitted: Typically 250 ìs Narrow Loop Bandwidth Typically <10 ms RF LEAKAGE <5 ìV PD at the carrier frequency into a single turn 25 mm loop, 25 mm or more from the front panel GENERAL Standard Warranty 24 months Calibration Interval Recommended 24 months Power Consumption (typical) +3.3 V 50 mA (250 mA transiently during power up) +5 V 650 mA +12 V 50 mA* -12 V 30 mA * 3011 OCXO requires 300 mA startup reducing to 150 mA after 5 minutes Electromagnetic Compatibility EN 61326-1:1997, Emissions Class A, Immunity Table 1 – Performance Criteria B Safety EN 61010-1:2001 Safety requirements for electrical equipment for measurement, control and laboratory use-Part 1, General requirements Driver Software VXIpnp compliant software driver