Aeroflex 2050 Series Signal Generators - AEROFLEX - #7

Text version of the page

For the very latest specifications visit www.aeroflex.com abled. External input Rear panel BNC socket accepts an input at 1, 5 or 10 MHz with an input level in the range 220 mV to 1.8 V RMS into 1 kÙ GENERAL GPIB INTERFACE A GPIB interface is fitted. All functions except the supply switch and display contrast are remotely programmable. Capabilities Designed in accordance with IEEE488.2. Complies with the following subsets as defined in IEEE Std. 488.1. SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E2. ELECTROMAGNETIC COMPATIBILITY Conforms with the protection requirements of the EEC Council Directive 89/336/EEC. Conforms with the limits specified in the following standards: IEC/EN61326-1 : 1997, RF Emission Class B, Immunity Table 1, Performance Criteria B SAFETY Conforms with the requirements of EEC Council Directive 73/23 EEC (as amended) and the product safety standard IEC / EN 61010-1 : 2001 + C1 : 2002 + C2 : 2003 for class 1 portable equipment, for use in a Pollution Degree 2 environmen. The instrument is designed to be operated from an Installation Category 2 supply. RATED RANGE OF USE (Over which full specification is met) Temperature 0 to 55°C. Humidity Up to 93% at 40°C. CONDITIONS OF STORAGE AND TRANSPORT Temperature –40°C to +71°C. Humidity Up to 93% relative humidity at 40°C. Altitude Up to 4600 m (15,000 ft). POWER REQUIREMENTS AC supply Four voltage settings covering: 100 V~ (Limit 90 - 115 V~) 120 V~ (Limit 105 - 132 V~) 220 V~ (Limit 188 - 242 V~) 240 V~ (Limit 216 - 264 V~) Frequency: 50 - 400 Hz (Limit 45 - 440 Hz) 180 VA max CALIBRATION INTERVAL 2 years. DIMENSIONS AND WEIGHT (Over projections but excluding handles) Height Width Depth Weight 152 mm 425 mm 525 mm 21 kg OPTIONS OPTION 1 - SECOND MODULATION OSCILLATOR OPTION Specification as Modulation Oscillator. OPTION 2 - PULSE MODULATION OPTION Modulation Modes Pulse modulation may be used alone or in conjunction with ÖM, FM, Wideband FM, Vector or Digital Modulation. Rise/Fall Time 25 ns. Control 0 V for carrier off, +5 V for carrier on. Threshold level is typically +2.5 V. ON/OFF Ratio Better than 70 dB. Input impedance 50 Ù. OPTION 105 - SLOW RISE TIME PULSE MODULATION Modifies pulse modulation option for a typical rise and fall time of 1 ìs. OPTION 6 - AVIONICS OPTION See separate sheet. OPTION 8 - RF PROFILE AND COMPLEX SWEEP See separate sheet. OPTION 12 - ELECTRONIC ATTENUATOR Carrier Frequency Range 250 kHz* to 1.35 GHz (2050), 250 kHz* to 2.7 GHz (2051). * Useable to 10 kHz (50 MHz in Digital or Vector modes, useable to 10 MHz) RF Output Range (Analog mode) -138 dBm to +10 dBm When AM is selected the maximum output level reduces linearly with AM depth to +4 dBm at maximum AM depth. Range (Digital or Vector mode) -132 dBm to +3 dBm peak envelope power. Accuracy ±1.2 dB in non Digital or Vector modes for output levels > -127 dBm at 22°C ±5°C Temperature Stability ±0.01 dB/°C VSWR < 1.5:1 for output levels less than 0 dBm. Reverse Power Handling 1 W from a source VSWR of up to 5:1. Amplitude Modulation Standard specification applies for carrier frequencies above 50 MHz (Above 100 MHz for Option 6).