PROVIDING SOLUTIONS, NOT JUST EQUIPMENT STANDARD FEATURES • Compact size with full size performance • Standard off-the-shelf programmable logic controller with 1/16 DIN digital temperature control • Standard units 180°F to 250°F • Low temperature units 120°F to 180°F • High temperature units 250°F to 400°F • Control system complies with NFPA79 and UL/CUL for maximum safety, including electrical disconnect and branch fusing • Dual bed, closed process loop design uses 13X desiccant and a unique air flow circuit AD-M Machine Mount Dryer with Hopper • -40º dewpoint in high humidity environments (in excess of 150 grain moisture level) • Removes up to 1% of moisture content by weight • New cabinet style design for maximum safety • Stainless steel desiccant cans and heater boxes • High-efficiency 1 micron filter with easy accessibility • Electric switching valve—no compressed air required • Energy-efficient, high pressure regenerative blower provides full-rated air flow to process: 15, 30 and 60 CFM (25, 50 and 100 m3/hr) • Premium quality, low watt-density Incoloy® heaters for dependable service and long life • CE models available AD Floor Mount Model Desiccant Dryer • 460/3/60 supply voltage—others available AD SERIES MINI CABINET DRYERS w w w. a e c i n t e r n e t . c o m

• Low heat operation 1 20°F to 1 80°F (includes a pre-cooler to cool dry air before entering the process heater) • High heat operation 250°F to 400°F (includes insulated process delivery air hose and a return air after-cooler to maximize the efficiency of the • Plasticizer trap with stainless steel housing • Any three-phase supply voltage • Portable carts • API PLC-based control system with touch-screen • NOMAD portable drying systems with integral conveying to process machine(s) maximum versatility. MACHINE MOUNT DRYERS ALSO INCLUDE • Machine mount adapter with drain • Interconnecting hose and...

The AP1 PLC controlled system includes a touch-screen interface. The standard control system features digital temperature control. STANDARD CONTROL SYSTEM FEATURES AP1 CONTROLLER FEATURES • Off-the-shelf 1/16 DIN temperature controller with auto tune and PID • Programmable logic based control system • Enclosure meets NFPA 79, UL and CUL electrical standards • Non-fused disconnect • High process temperature alarm light • Temperature controlled regeneration with safety • Touch-screen interface provides clear information about desiccant bed regeneration, process temperature, and dewpoint • Off-the-shelf...

STANDARD FEATURES • Unique mass flow design • Stainless steel construction (inside and out) • Hinged access door (3.0 cu. ft. [85 liter] and larger models) (Hinged access door on 1.7 cu. ft. [50 liter] model is optional) • Dual-wall insulated cylinder and cone section • Slide gate • Extended length sight glass on the hopper door OPTIONAL FEATURES • Handle kit with casters for floor stand (SD 0.40 - SD 9.0 floor-mount models only) • Floor stand (less casters) • Cart to mount 1 drying hopper and 1 AD/ASD/AC/ACMSeries dryer • Cover selections: SRC/SLC, SRH/SRL, manual • Hopper loader mounting bracket...