Pressure transmitter - 6 Pages

Pressure Transmitter Series ADZ - SML 10.0 Pressure T ransmitter Series ADZ - SML 10.0

4...20 mA 4...20 mA

Measuring range from:-0,1 MPa...+0,1 MPa and 0,06 MPa bis 200 MPa-1...+1 bar and 0...600 mbar to 2000 barOutput signal:4...20 mA (2 wire)
Operating temperature:-40C bis +105аCMedia:to +125C

Resistant to pressure peaks shockproof and vibration-proof Insensitive to temperature shocks Protective system IP 65 according to DIN EN 60 529 Parts and casing with contact to measuring materialof CrNi steel >

Construction Construction

Piezo-resistive, vacuum-proof Stainless steel membrane Poly-Si on SiO2 (thin film resistances) Mixed signal ASIC Case:Stainless steel Electrical connection:MVS DIN EN 175 301 803 *) Port configuration:G 1/4 " Design E *) Accuracy: 0.5% F.S. (RT) standard Weight: 90 g*) other on request thread types and plug >

Application / possible uses Application / possible uses

Hydraulics Air Conditioning + Heating Testing Technology Industrial Robots Process Control Water Technology Pneumatics >

Description Description

The ADZ-SML-10.0 pressure transmitters contain only a small number of active components, such as the sensor element, a signal processing ASIC and a U/I converter circuit. The transmitter works with protection circuits connection included with pressure peak damping, load-dump-protection and they are EMV stability reverse voltage protected. Calibration takes place electronically, so that the Pressure transmitters display a comparably small total error and are stable in the long term. The hermetically welded thin film measuring cell Ensures a high degree of longterm resistance to leakageand stability. The ASIC is a programmable precision-CMOS-ASIC with EEPROM data storage and analogue signal path. The special steel membrane is completely vacuum-tight, extremely burst-proof and can be used with all standard media in hydraulics, pneumatics, environmental technology, process technology, semi-conductor technology and automotive engineering, in as far as they are compatible with special steel. This thereby covers use in standard applications in mobile hydraulics and in other areas of application. The great exactness and the robust, compact structure guarantee a broad range of possible uses in industry. On the basis of the combinability of different mechanical and electronic connections, a variety of different pressure transmitters is offered. Upon request, a test protocol , approbations work certificate or (DKD protocol) calibrate certificate - is supplied. >
Connection - PIN 123 +V >
S

V

-V >
S resp.

I

out - Mistakes and changes in the sense of technical improvements reserved. -01/06 >

Pressure transmitter
  1. P. 1

  2. P. 2

    Pressure Transmitter Series ADZ SML-10.0 Technical informationTyp: ADZ-SML-10.0 Measuring range(bar / Mpa) barMPabarMPa standard pressure ranges *)0,6...
  3. P. 3

    Pressure Transmitter Series ADZ - SML 20.0 Pressure T ransmitter Series ADZ - SML 20.0 0...10 V 0...10 V Measuring range:-0,1 MPa...+0,1 MPa and 0,06...
  4. P. 4

    Pressure Transmitter Series ADZ SML-20.0 Technical informationTyp: ADZ-SML-20.0 Measuring range(bar / Mpa) barMPabarMPa standard pressure ranges *)0,6...
  5. P. 5

    Pressure Transmitter Series ADZ Pressure T ransmitter Series ADZ - - SML-31.0 SML-31.0 0,5...4.5 V 0,5...4.5 V Measuring range from:-0,1 MPa...+0,1...
  6. P. 6

    Pressure Transmitter Series ADZ SML-31.0 Technical informationTyp: ADZ-SML-31.0 Measuring range(bar / Mpa) barMPabarMPa standard pressure ranges *)0,6...
Text version

All ADZ NAGANO catalogues and technical brochures

  1. SMH

    4 Pages

    En
  2. DPSX9I

    4 Pages

    En
  3. DS4

    4 Pages

    En

Archived catalogues

  1. Pressure Switch

    2 Pages

    En