Pressure Transmitter-Series PS 1 - ADZ NAGANO - #1

Text version of the page

- Mistakes and changes in the sense of technical improvements reserved. - 01/06 The most reasonable ADZ Floater Probe SML-PS1 has been developed for standard level and filling level indication in hydroplants, oil or other non-aggressive media down to 250 m in depth. For more aggressive media, there is an optional variant designed with a special coating. It is easy to handle, very robust and supplied in a housing of stainless steel with an attached cable (pressure compensation integrated). There are two variants regarding cap configuration (as a weight of steel or as a plastic cap). The transmitters are long-term stable and may be supplied in variants with 0,25 % FS respectively. Description Application / possible uses Construction Pressure Transmitter-Series PS 1 Tank Pressure and Level Probe Pressure range(relative): 5 kPa, max 0...2500 kPa (from 1 m WC /water column, 0...50 mbar, max 0...25 bar) Ambient temperature: + 5 °C to + 70 °C Output: 4...20 mA - 2 wire/ 0...10 V - 3 wire/ 0...5 V - 3 wire Operating voltage: 12...30 V 1 Protection class: DIN EN 60 529 - IP 68 down to 250 m navigable depth 1 Media - contacting parts and housing made of CrNi steel and plastics with NBR O-ring 1 Cable ventilated 1 Piezo-resistive, vacuum-proof, stainless steel diaphragm with pressure range resistor (Poly-Si on SiO ) or optional Silicon < 1 bar 2 1 Mixed signal ASIC 1 cable Santopren TPE-V or Pur optional grey 1 Case: Stainless steel, Lenght: ca. 140 mm, ø 22 mm 1 Accuracy: Class 0,5 % F.S. 1 Weight: 250 g 1 Liquid-level and standard level measuring in tank-storage 1 reservoirs 1 Hydro-engineering plants