Foil and Paper Tapes - Advance Tapes - #2

PAPER TAPES AT6300 • AT6301

• Paper tapes generally have low tack, al lowing for repositioning to applied surface.

• General ly, paper tapes are used indoors.

• Paper tapes should be stored at a temperature of no lower than +5°C. If a tape is left in an unheated van or unheated warehouse in the winter months, it may need time to warm up prior to applicati on.

• Paper tapes should be applied at between +10°C and +40°C.

• Surfaces should be as clean and dry as possible with any loose material and dust removed as far as possible.

AT6300 60°C Paper Masking Ta pe

Applications

AT6300 • Technical Data

Thickness 011rrm

Beakng load 30 Won

Eongtion 9% Aheson

See 3.8 Nccm

Service temp 0°Cto + 60°C

Easy unwind

Easy tear

Low tack

FR-postionabe

Feel dean up to 3 hours

fMskng off dring decorating drilling or spraying Temporary bunding

AT6301 80°C Pa p e r

Masking Ta p e

Applications

Ad h esive pro p e rti e s

Adhesion leve l • The force required to remove the

tape from a surface after it has been appied All fol

tapes from Advance Tapes are good performers as far as

adhesion leve is concerned The actual levels can be

quantified by industry standard tests

Quick stick (Ta c k ) • This is the intia bond that

the tape has with the surface that it is stuck to Note

that a tape that has high tack properties does not

necessarily have high adhesion properties All fol tapes

from Advance Tapes are good performers as far as quick

stick or tack is concerned

P hysical Pro p e rti e s

B reaking load • The force needed to break the

tape under stress

Flame re ta rd a n t • The ability of a tape to

withstand exposure to flame

Se lf -extinguishing • The ability of the tape to

cease burning once the flame is removed

Se rvice temp • The temperature range at which

the tape will continue to gve satisfactory results once

applied

Sh e a r st re n g t h • This can be best described as how well a tape will hold a weight. Sp e c if i cati o n s • Specific specifications that individual tapes meet.

T h ic k n e ss • Measurement gven in millimetres incudng the adhesve (Exdudes reease paper). Water re si sta n ce • The decree of water resstance of the tape.

• Good high temperature resistance

• Easy unwind

• Easy tear

• Low tack

• FR-postionabe

• Peel dean up to 12 hours

Masking off duing decocting drilling or spraying

Temporary bundling

AT6301 • Technical Data

Thickness 012mm

Beakng load 30 Wcm

Eangllicn 9% Aheson

See 26 Wcm

Service temp 0°Cto + 80°C

36

37