Text version of the page

EEC – MATERIAL SAFETY DATA SHEET

According ISO 11014-1 Presented in compliance with 93/112/EEC directive of December 10
th 1993 Issue E8– February 8
th th 2008 Replaces Issue E7– January 8 2008

1.IDENTIFICATION OF SUBSTANCE / PREPARATION AND COMPANY

1.1.Trade name : MOULNET 890SP 1.2.Application : Mould cleaner 1.3.Product type : Processing aid 1.4.Formula : xxx g.mol
-1 1.5.Company name : ADDITEK S.A.S Rue de la Fontaine F-80120 RUE FRANCE 1.6.Phone number for emergency : +33 (0)3 22 25 62 65 1.7 Fax number : +33 (0)3 22 25 62 68 1.8 E-mail address : contact@additek.net

2. COMPOSITION / INFORMATION OF INGREDIENTS .

2.1. Main component : Blend among N-methyl-2-pyrrolidone n° CAS 872-50-4 2.2. Additives : Not concerned. 2.3 Impurities : None.

3.HAZARDS IDENTIFICATION

3.1 Main hazard : Xi - Irritant 3.2 Secondary hazard : NONE 3.3 Risk phrases : R36/38 3.4 Safety phrases : S41

4.FIRST AID – MEASURES:

4.1 Skin contact : Wash skin immediately with water during 10 minutes. Seek a physician. 4.2 Eye contact : Flush immediately with plenty of water during 15 minutes at least. See an ophthalmologist if irritations persist. 4.3 Ingestion : Drink a lot of water – Seek rescue wit medical staff. 4.4 Inhalation : Lay down and let carry by rescue.

5.FIRE – FIGHTING MEASURES

5.1.Recommended extinguishing media : Polyvalent powder, carbon dioxide (CO
2 ), atomised water. 5.2. Unadvisable extinguishing media : NONE. 5.3. Hazardous combustion product : Not known. 5.4.Special protective measures for fire-fighters : No special equipment. In case of thick fumes, wear a self contained breathing apparatus is recommended. 5.5 Particular risks of fire or explosion : Can form combustion products. Do not breathe fumes.

6.ACCIDENTAL RELEASE MEASURES

6.1. Personal precautions : Safety goggles and protective clothes recommended. 6.2. Environmental precautions : Stop spillage. Circumscribe area concerned to prevent product from entering sewers or drains. Warn authorities in case of accidental spillage 6.3 Spill clean-up methods : Wipe, scrape and absorb with inert material. Put absorbed product in a container for disposal in accordance with local national and EEC regulation.

7.HANDLING AND STORAGE

7.1 Handling : Good ventilation of the work place. Avoid contact with eyes and skin. 7.2 Storage : Keep in tightly closed container and in a dry place. Maximum storage temperature: 50 °C. Do not use corroding container.
Page 1 on 3