LABORATORY FILTRATION APPARATUS
4Pages

{{requestButtons}}

Catalog excerpts

LABORATORY FILTRATION APPARATUS - 1

LABORATORY FILTRATION APPARATUS Ace Glass introduces a new concept for lab filtration apparatus. Using our famous Ace-Thred design, we are able to thread the filter funnel and filter flask together without the silicone stopper and troublesome clamping device. This design also eliminates leakage problems. The filter unit has four basic parts; the funnel, flask and adapter piece and a removable glass fritted disk. The unit can be completely disassembled for easy cleaning. Instead of a sealed-in glass fritted support, the disks can be easily removed and cleaned and we offer the availability of different frit sizes, from extra coarse to extra fine. The adapters are available in nylon or PTFE. Other polymers on special order. The complete units are autoclaveable. ✥✥ No clamps, no alignment issues ✥✥ Easy-to-remove frit — simple to clean, simple to change size ✥✥ Better membrane utilization — uses most of the O.D. of the membrane, i.e., 45mm of 47mm membranes ✥✥ Adapters are available in PTFE or nylon ✥✥ Autoclaveable ✥✥ 25mm, 47mm, and new 75mm fritted areas match popular membranes or filter paper O.D. dimensions

Open the catalog to page 1
LABORATORY FILTRATION APPARATUS - 2

Complete Filtration Apparatus Includes: 1000ml_ Filter Flask w/Ace-Thred top, & #7 Ace-Thred & Ace-Safe connector, Nylon Adapter w/#25 Ace-Thred bottom, & #50 Ace-Thred top, nylon ring 25mm Porosity B (70-100 micron)fritted disc, 500ml_ graduated funnel w/#50 Ace-Thred bottom. 10OOmL Filter Flask w/#25 Ace-Thred & #7 Ace-Safe connector IQOOmL lOOOmL Filter Flask w/#24/40 ST outer joint top and hose barb side port 1000ml_ Nylon adapter w/#25 Ace-Thred bottom & #50 Ace-Thred top Adapter Nylon adapter w/#50 Ace-Thred top and 24/40 inner joint bottom Adapter PTFE adapter w/#25 Ace-Thred bottom...

Open the catalog to page 2
LABORATORY FILTRATION APPARATUS - 3

75mm New size and design, 75mm OD filtration apparatus. Can be used with membranes or filter paper with 75mm OD. Design gives 99% utilization of the surface area for membranes or filter paper. Can be used with just Size C “Coarse” fritted glass disc for solvent recycling. Glass components are all borosilicate and the center adapter is all inert PTFE. The entire assembly threads apart easily for cleaning and filter paper insertion. Available with either a 2L Erlenmeyer flask or a 5L Duran GLS80 bottle. Both are autoclaveable. Complete Filtration Apparatus Erlenmeyer flask version. Easily...

Open the catalog to page 3
LABORATORY FILTRATION APPARATUS - 4

Instatherm 47mm This apparatus differs from the standard 47mm filter apparatus as it uses Ace Glass’ proprietary Instatherm technology to evenly heat the top 400mL funnel, thus keeping the viscous materials in a flowing liquid state. The middle adapter is PTFE with a PTFE snap-ring. The interchangeable fritted disk is the coarse, 25-to-50 micron size. The entire assembly can be easily taken apart for cleaning and the fritted filter disc can easily and in-expensively be cleaned or replaced. This system is excellent for filtering oils or thick slurries and using either 47mm membranes or...

Open the catalog to page 4

All ACE GLASS Incorporated catalogs and technical brochures

  1. Impresario I

    2 Pages

  2. Condensers

    2 Pages

  3. Septa

    6 Pages

  4. No-Air

    48 Pages

  5. Photochemistry

    24 Pages

  6. Nanotechnology

    40 Pages

  7. Dynablocs

    8 Pages

  8. Cell Culture

    12 Pages

  9. O-Ring Kits

    2 Pages

  10. PTFE Reactor

    2 Pages

  11. Stoppers

    2 Pages

  12. Suba-Septa

    2 Pages

  13. Instatherm

    8 Pages