catalogue search
P. 01
P. 02
|
|
You may also be interested in
Barcode verifier, Sorter, Label applicator, Barcode reader, Label printer
Text version of the page
|
|
|||||||||
|
|
FASTTag® In-Motion™
|
|
|||||||
|
|
|||||||||
|
Technical Highlights
The architecture of the FAST Tag In-Motion System is shown on the back of this sheet.
The FAST Tag In-Motion labeling System is configurée!, controlled and monitored via the Accu-Sort FAST suite of software products. The FAST (Flexible, Automation, Solution, Tools) software foundation has been installed in over 400 Systems to date, providing a robust, proven architecture to meet the most demanding RFID material handling System application
This software also interfaces seamlessly with your WMS System through Accu-Sort's FAST Tag DataServer. The FAST Tag DataServer allocates and records unique EPC codes to ensure compliance. This data is stored in a centralized database to enable the tracking of carton from "Tag-to-ShipM
System Development Methodology
The eustomer-speeifie configuration of FAST Tag In-Motion is determined as part of Accu-Sort's needs assessment process. This process, refined over 30 years, leverages the material handling and RFID expertise of our staff for the design of your optimal solution. It includes performing business assessments, process mapping and RF surveys of the customers facilities. After a System is designed, approved, built and tested at the Accu-Sort facility, it is shipped to your site for System installation and pilot testing. The pilot testing phase is a critical installation élément to minimize disruptions to your existing supply chain and data management infrastructure. The System is optimized and tested to ensure compliance.
|
(3) RFID Tagging
The integrated RFID vérifier in the tag applica-tor, checks the tag before writing, writes the appropriate tag information and then vérifies this programmed RFID tag before it is applied to the carton. If the tag is not programmable, it is wound on the take up réel and the next RFID tag is evaluated. The next valid tag is programmed
|
(2) Data Lookup
FAST Tag looks up the item in the product database and sends the RFID tag and bar code label format data to the corresponding applicator.
|
|||||||
 |
|||||||||
|
(1) Inbound Identification
Tagging and labeling opérations begin when a carton passes the induct photoeye. The inbound bar code scanner or caméra (shown) reads the carton label and sends the decoded data to the FAST Tag controller.
(6) System Control and Monitoring The FAST Tag software provides centralized System configuration and control. Users can set up label and tag fields, monitor System performance statistics as well as configure and tune line operating parameters.
|
|||||||||
 |
|||||||||
|
FLEXIBLE AUTOMATION SOLUTION TOOLS
|
a8
 |
Visibility from Tag to Ship
EDGEWARE I AUTOMATION I VERIFICATION I INTEGRATION
|
The carton passes under the outbound bar code scanner and the outbound RFID reader. The data from the applied RFID tag and bar code label is compared to the expected data for the carton as it is tracked through the System. If the data is not valid for the tag or label, the carton is diverted and the operator is alerted to the need for corrective handling. If the data is valid, tracking is complète and the carton exits the System with détail data optionally sent to an external host, ERP, or WMS System.
|
(4) Bar Code Label Application
The label printer/applicator prints and applies the bar code label.
|
|||||
 RFID Portal(s) Outbound Vérification Inbound Receiving
|
Spécification
|
||||||||
|
For more information about auto-ID and material handling solutions from Accu-Sort Systems, contact us at:
ACCU-SORT® SYSTEMS, INC. 511 School House Road Telford, PA 18969 1-877-ASI-RFID
|
|||||||||
|
RFID
Read/Write Frequencies Protocols Supported Tag Size Supported EPC Code Management
|
902-928MHz
Class 0/0+, Class 1 and Future Gen 2 4"x6", 4"x2", 4"x4", 4"x1", 2"x2"
|
||||||||
|
System Spécifications
Printers Supported Wireless LAN Sériai Port USB Ports Ethernet
|
Zébra, SATO, Datamax
802.11b
RS-232
2
|
||||||||
|
Physical Spécifications
Operating Température Power
|
32°F to 113°F (0° to 45°C) 230 or 110 VAC 50-60Hz
|
©2004-2006 Accu-Sort Systems, Inc. Ail rights reserved. The AS logotype, ACCU-SORT are trademarks or regis-tered trademarks of Accu-Sort Systems, Inc.
|
|||||||
|
|
|||||||||
|
I 100005G34GRG0 | 06-0062 | 2006.03.21 RAY
|
|||||||||
|
|
|||||||||