catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
P. 41
P. 42
P. 43
P. 44
P. 45
P. 46
P. 47
P. 48
P. 49
P. 50
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
You may also be interested in
CCD camera, Barcode reader, Sorter, Label printer, Automatic labeler
Text version of the page
EZReader HF & EZTune Antenna Installation & User Guide Modes of Operation 35 The error messages from the EZReader-HF are: These messages will be in the format: NO TAG–No tag was read or it could be in “Quiet” mode COLL– More than one tag responded. MISREAD–The data returned from the tag was garbled.The ISO Flags (if not 0x00) will indicate an error occurred, and the next byte after the Flags will correspond to the specific errors which are shown below (Taken from ISO 15693-3). 0x00 No Error 0x01 Command is not supported 0x02 Command is not recognized 0x03 Command option is not supported 0x0F Error with no information (error code not supported) 0x10 Block is not available (doesn’t exist) 0x11 Block is already locked 0x12 Block is locked so its content cannot be changed 0x13 Block was not successfully programmed 0x14 Block was not successfully locked All others Reserved for Future Use (RFU) Host Control Mode Command Format RXHDR Serial Command RXTRL Parameter Dependent Yes No Yes Parameters that will cause data to be included in command to unit.RXHDRx =
anything
other
than Null (0x00)See specifics of each serial command RXTRLx =anythingotherthan Null (0x00)
Accu-Sort Systems, Inc.
Accu-Sort Systems, Inc.