Text version of the page

On steel supports using wall bracket/mounting The simplest type of mounting of wall jib cranes is the bolting onto existingsteel supports. For this, the supports must be of structurally sufficient size(they may need to be reinforced) and exhibit a sufficiently wide connection surface. All ABUS wall jib cranes include this mounting option in the scope of delivery of standard equipment. For types LW and LWX this is provided through the wall bracket and for type VW through direct bolting on of bothwall mountings.

Mountings for Wall Jib CranesAdapted flexibility

On reinforced concrete supports using brackets On structurally suitable, square or rectangular reinforced concrete supportswhich can be freely enveloped, wall jib cranes can be mounted with brackets. The required tension forces can be applied through threaded rods to hold the crane securely to the support at the desired height. The support must have the required minimum width for this. ABUS deliversbrackets designed for the support dimensions, together with the requiredmounting material. On reinforced concrete walls or supports using weld-on plates On reinforced walls using wall brackets and through-wall anchors Concrete walls or supports can be prepared for the mounting of wall jibcranes on weld-on plates through suitable mounting plates with grouted anchoring as a substructure. When performing this construction work, care should be taken that the mounting plates lie exactly flush and exhibitplumb-vertical connection surfaces. The weld-on plates are welded to the substructure. The wall bracket or the wall mountings of the crane are bolted onto the weld-on plates. ABUS delivers the weld-on plates with therequired mounting screws. For mounting on reinforced concrete walls of adequate load-bearing capacity, wall brackets are used. For the types LW and LWX, the wall bracket is included in the scope of delivery. For the type VW, it is availableas optional equipment. The wall brackets are mounted on the wall with ties and counterplates. Included in the ABUS scope of delivery are the anchor rods, counterplates and the required mounting materials, all adapted forthe respective wall thickness. On steel supports using weld-on plates Weld-on plates can be welded directly onto steel supports or load-bearingsteel structures providing holes will not or cannot be drilled through them. (not pictured)
Structural inspection of the building Jib cranes transfer forces and torque to the building and supporting structures. Safe crane operation depends entirely on the adequate checking ofthe support structure by a structural engineer.

jib crane - 14275 !

Moving on up.
19 crane systems