Electric chain hoists - ABUS - #9

Text version of the page

Moving on up. crane systems 9 Units for special voltages available on request: 440 – 480 V / 60 Hz 208 – 230 V / 60 Hz 220 – 240 V / 50 Hz 550 – 600 V / 60 Hz 360 – 400 V / 60 Hz 460 – 500 V / 50 Hz Alternative: Mini-RC for two-stage lifting and lowering as well as trolley travel. For radio remote control, cruciform limit switches are recommended for limiting trolley travel. For optimum operation, advance slow-down followed by shutdown is strongly recommended. ABUS trolleys ABUS EF electric trolleys • sturdy design with roller bearings • virtually no maintenance required • speed 5/20 m/min • high-quality standard drive system • degree of protection IP 55 • durable electromechanical disk brake • machined rollers • fitted with drop stop and wheel climb prevention lugs • colour RAL 5017 (traffic blue), suits many different chain hoist models • adjustable for flange widths from 64 to 305 mm ABUS Mini-RC remote control unit ABUS Mini-RC plug and play radio remote control unit for two-stage lifting and lowering for a range up to 25 m. The control unit consists of a lightweight hand-held transmitter with batteries and belt clip, an integrated horn, emergency stop switch and undervoltage detection system with buzzer. The receiver is designed for plug and play operation and can simply be plugged into the hoist instead of the pendant control. This option is only available in combination with a 48 V control system. Additional power socket on hoist This option includes an additional 5-pole (3/N/PE) power socket on the hoist for ancillary equipment. The socket is connected upstream from the emergency stop switch and the ancillary equipment therefore remains in operation following an emergency stop. Easy connection and disconnection is possible. Depending on the individual application, it may be necessary to provide a 5-pole power supply. (This option is not available in combination with an electric trolley.) ABUS HF push trolleys • sturdy design with roller bearings • virtually no maintenance required • machined rollers • fitted with drop stop and wheel climb prevention lugs • colour RAL 5017 (traffic blue), suits many different chain hoist models • adjustable for flange widths from 42 to 305 mm