ABS Product overview - ABS Group - #9

/ 40


catalogue search
P. 01
P. 02
P. 03
P. 04
P. 05
P. 06
P. 07
P. 08
P. 09
P. 10
P. 11
P. 12
P. 13
P. 14
P. 15
P. 16
P. 17
P. 18
P. 19
P. 20
P. 21
P. 22
P. 23
P. 24
P. 25
P. 26
P. 27
P. 28
P. 29
P. 30
P. 31
P. 32
P. 33
P. 34
P. 35
P. 36
P. 37
P. 38
P. 39
P. 40
Pages:


See other catalogues for ABS Group

Text version of the page
ABS light wastewaterpump MF
ABS submersible wastewater pump AS
ABS Piranha submersible grinderpump
The MFseries (354-804) consist of compact submersible drainage water pumps. The pumps are used fordewatering of buildings and for pumping fluids from low lying locations. Level control switch is an option.
• DischargeSizes:2inches
• MotorRange: 0.70 to 1.80 kW
The AS-series consist of robust and reliable domestic wastewater pumps. The AS-pumps have water pressure-tight encapsulated fully Rood-proof motors and are suitable for portable as well as stationary installations.
• DischargeSizes:DN50,DN65&DN80
• MotorRange: 1.2 to 2.6 kW
The Piranha range contains submersible wastewater pumps with a shredding action cutting up the domestic wastewater into small particles. This allows for reliable discharge of effluent under pressure using small diameter pipework.
• DischargeSizes:DN32&DN50
• MotorRange: 1.0to 11.0 kW
«0
KS float [optional]
Contrablock system
Piranha cutting system
Vortex impeller
Plug fitted
Vortex impeller
1 phase 3 phase 1 phase 3 phase 1 phase 3 phase
230 V 400 V 230 V 400 V 230 V 400 V
ABS lifting station Synconta 601
ABS lifting station Synconta 801
ABS lifting station Synconta 901 &902
The Synconta 601 is a synthetic prefabricated
sump forABS submersible pump Piranha. It is idealforapplications where gravity discharge into the sewer is not possible. The sump is installed outside the building underground. The unit is designed as a single pumping station with two inlet ports.
TheSynconta 801 is a synthetic prefabricated sump forABS submersible pumps AS and Piranha. It is idealforapplications where gravity discharge into the sewer is not possible. The sump is installed outside the building under ground. The unit is designed as a single pumping station and three inlet ports.
The Synconta 901-902 is a larger capacity synthetic prefabricated sump forABS submersible pumps AS and Piranha. The Synconta 901 is designed as a single pumping station and the Synconta 902 as a two pump pumping station.
■ .
Piranha Pump
Panel [optional]
Panel (optional]
Panel [optional]
Piranha pump
Piranha pump
AS pump
AS pump
1 phase
230 V
3 phase
400 V
1 phase
230 V
3 phase
400 V
1 phase
230 V
3 phase
400 V
Floats or Level sensors [optional]
Floats or Level sensors [optional]
Floats or Level sensors [optional]

pageCatalog pdf di En 2012-05-21-23