Crystalite® Diamond Products - abrasive technology - #9

This disc has a uniquely shaped working surface of randomly interspaced islands. The resulting channels flush away debris and prevent the stone from pulling down excessively to the lap. It is superb for rough cutting facets and grinding cabochon backs.

Note: These discs will cut faster and are coarser than The Standard™ discs. 180 mesh is an excellent cabochon preformer - 360 mesh is superb for facet roughing -1200 mesh is excellent for facet finishing. 1/2" Arbor hole.

Now you can handle large work pieces with ease. These dot pattern discs feature aggressive, fast cutting action for rough cabbing and preforming large faceted stones. They are ideal for cutting large flat areas where hydroplaning and grinding force are factors. These discs come with or without an arbor hole. For discs with an arbor, a 1/2" center hole is standard (specify other). Discs without a center hole provide you with a larger working area for glass and stone, allowing you to utilize the full face of the disc. Other diameters, mesh sizes and arbor holes are available.

180 C5300110 C5300310 600 C5300170 C5300370

260 C5300130 C5300330 1200 C5300190 C5300390

360 C5300150 C5300350

The fast cutting 100 mesh disc cuts like a 40 mesh and the 180 mesh disc cuts like a 60 mesh. It is excellent for rough cabbing and pre­forming large faceted stones. As the tips of the ripple forms wear, fresh diamond is exposed, permitting the disc to remain sharp throughout its long life. This disc will cut agate with ease. 1/2" Arbor hole.

100 C5300470 C5300490 180 C5300530 C5300550

9