Text version of the page

™ ™ The hard working Q-VAC 100wet vacuum sucks up spills tomaintain safety and removecoolant from machine sumps. Gets the job done quickly, quietly and is maintenance free. Runs on compressed air. • Removes floating surface oils • Aerates and refreshes coolant • Eliminates mist cooling • Low noise level • Won’t foam up contents • Coalescing media never needs to be replaced • Uses no Freon • Catches drips

Plastic Disk Skimmer - 17917 Make old coolant useable again.

• Magnetic base for easy mounting

CoolantRefresher

• Easy to move
™ ™ • Works while machine is running
™ The ChillyBits air chiller uses compressed air to produce cold air to directly cool bits and tooling during machining operations. Using ChillyBits eliminates mist cooling, extends tool life, speeds up machining time, and eliminates heat related parts growth. In somecases, ChillyBits can allow for the completeelimination of coolant and all of the cost and problems associated with it. • Extends tool life • Adjustable temperature for optimum cooling • Floating pickup head handles fluctuating fluid levels effortlessly The air driven Chiperator is aninexpensive way to clean dirty machine sumps. It quickly separates chips and swarf from liquids. It drains or refills its 55 gallon drum in less than 2 minutes! Simply suck up coolant laden with chips, swarf and muck, and the Chiperator strains the unwanted solids. The Chiperator then pumps the strained coolant back to the sump.

Keep Your Coolant CHIP-FREEand OILFREE

• Oneyear warranty The Abanaki Coolescer is a must for any machine shop dealing with machine tool coolant. This unit will extend coolant life, reduce disposal costs, eliminate down time, improve tool life and help prevent dermatitis. Special magnetic tube snakes alongthe bottom of the sump, attractingferrous chips and swarf. As the tubereturns to the the Chip Grabber,floating oil is attracted andpicked up as well. • Strains 40 gallons of chips and coolant per minute

See Us In Action!

View a series of demos that show Abanaki skimmers and products hardatwork. • Acts as both a vacuum and a pump • Continuously removes chips and tramp oil • Automatically mixes andproportions coolant concentrate and water. • Economical, disposable filter bags
™ 1 • Filters out plastic, steel, aluminum and ceramic chips and shavings from coolant • Up to 1 â�„
2 g.p.h. ofoil removed • Consistant mix ratios ranging from 400:1 to 4.5:1 • Quiet; no moving parts
Go WithThe Pro! • Two part safety system includes automatic pressure relief valve plus backup valve
www.abanaki.com • Mix specific tips mean no accidental changing of mixture ratio

Odor Control Tablets

The inexpensive way toremove unwanted tramp oils from coolants and parts washers, but with all the quality that you expect from Abanaki!
(7546) • Safe: No more tipping drums
(440) 543-7400

1-800-358-SKIM

• FAX: (440) 543-7404 Put an End to that Nasty Rotten Egg Smell! ™
™ • Water powered
™

www.abanaki.com

• No hassle, no measuring, no mess

The ONLYindustrial skimmer manufacturer with ISO 9000/2001 certification.

• Eliminates coolant odors immediately by neutralizing hydrogen sulfide gases • Capped troughs and wiper standoffs prevent oil drips • Quick setup • Prevents anaerobic bacteriafrom building up andspreading • Boomerang blades wipe more oil off disk • Not a perfume • No disposal problems

Life-supportfor coolant

• Extends coolant life
™ • Safer and less expensive than biocides • Shaft is sealed to prevent prematuremotor wear from oil contamination • Puts an end to stagnantcoolant • 1tablet per week maintains 25 gallons of coolant

ISO 9000/2001Company

• Includes air diffuser to disperse air evenly • 15 tablets per tube
ALL UNITS AVAILABLE IN 110–220V, 50–60 HZ