SurePleat
2Pages

{{requestButtons}}

Catalog excerpts

SurePleat - 1

THE WORLD LEADER IN CLEAN AIR SOLUTIONS SurePleat™ SIDE ACCESS FILTER HOUSINGS • Units are constructed of durable 16-gauge galvanized steel • “Z” channel support members reinforce all four corners • All tracks and doors are fully gasketed • Holding frames or fasteners are not required Options • Double-walled insulation on doors only or on entire housing • Drain tubes for moisture separators • Flanges to connect with air handlers • 1" wide track for 6" headered filters • 4" track • Aluminum or 304 stainless steel construction SurePleat side access filter housings are minimum depth units designed to accommodate ASHRAE rated filters that are 2" (standard), 4", or 6" (optional) in depth. They are factory assembled flanged units suitable for installation in a duct or next to an air handling unit. As little as 12" of inline depth are required with no need for holding frames or fastener: SurePleat housings accommodate filters of different types and efficiencies up to 95% per ASHRAE Standard 52.1 dust spot test methods and ASHRAE 52.2 Test Standards. Filters are easily serviced through quick-opening access doors. Factory-gasketed channels and doors ensure positive sealing. The efficiency of fully-loaded housings is equal to that of the individual filters. Versatility Both prefilter and final filter requirements can be accomplished by using the combination 274" track. SurePleat housings are available in a wide range of sizes, up to 8 feet high and 12 feet wide. They can operate at face velocities up to 625 FPM with 4" filters. Construction Housings are constructed of 16-gauge galvanized steel with upstream and downstream outwardly turned flanges. Units include “Z” channel vertical support members on all four corners. Filter tracks are extruded aluminum and are gasketed with replaceable polypropylene pile air seals. Housings are equipped with two access doors that are sealed with neoprene gasketing on the perimeter. Doors are equipped with T/2" positive sealing knobs made of UV-resistant plastic with corrosion resistant brass inserts. Construction of the top pan allows rainwater to drain off easily, so that additional weather proofing is rarely required.

Open the catalog to page 1
SurePleat - 2

Performance Data Height Code 1. Height and width code: The first numeral represents the number of 24"x 24" filters high or wide. If 24"x 12" filters are also used in the height or width, the second numeral is “5”. 2. Dimensions are based on using nominal size 24"x 24" and24"x 12" filters. Select filters from capacity chart for2" disposable filters; 2" or 4" PREpleat® filters; 6" RAH RigidAir™; or 4" PrecisionCell® mini-pleat filters. 3. For capacities other than those shown, ratio the face velocities. 4. Maximum recommended velocities: 2" disposable filters, 300 FPM; 2"pleated filters, 500...

Open the catalog to page 2

All AAF International catalogs and technical brochures

  1. SureAire

    2 Pages

  2. Sureflo

    2 Pages

  3. sureseal

    2 Pages

  4. AstroPak®

    1 Pages

  5. AstroCel® I

    4 Pages

  6. PharmaGel

    2 Pages

  7. MEGAcel I

    2 Pages

  8. AstroCel III

    2 Pages

  9. AstroCel I

    8 Pages

  10. MEGApleat M8

    4 Pages

  11. AmAir HT

    2 Pages

  12. AmAir 1300

    2 Pages

  13. AmAir 300X

    2 Pages

  14. AmAir 1100

    2 Pages

  15. HeavyDuty

    2 Pages

  16. AmerSeal

    2 Pages

Archived catalogs

  1. AmAir 300GT

    2 Pages

  2. AmerSorb BP

    2 Pages

  3. Cyclones

    2 Pages

  4. DynaPure

    2 Pages

  5. ArrestAll

    4 Pages

  6. AstroCel I

    8 Pages

  7. AstroGel III

    8 Pages

  8. AmerFrames

    2 Pages

  9. VariCel

    4 Pages

  10. PerfectPleat

    4 Pages

  11. DriPak 2000

    4 Pages

  12. Roll-O-Mat

    2 Pages

  13. HEPA filter

    8 Pages

  14. Panel filter

    2 Pages