M.E.C. POLYFLEXOSIL BELT® - A Zeta Gomma - #1

Text version of the page

M.E.C. POLYFLEXOSIL BELT® Discount Ref. 27 Group H9 TO TRANSMIT MORE POWER IN LESS SPACE Made of polyurethane and width insert of polyamide. It is the idea belt for machines tools and for all the machineries that need in a small space a high speed and a perfect and regular smoothness. SPECIFICATIONS AND ADVANTAGES OF THE M.E.C. POLYFLEXSOSIL BELT® • Exceptional abrasion resistance • High modulus of compression Section of M.E.C. POLYFLEXSOSIL BELT Section Rated code width 3 M 6 3 mm 5 M 7 5 mm 7 M 8 7 mm 11 M 9 11 mm • High friction factor • Better environmental agents resistance • Stability of tension • Perfect smoothness without vibration with high speed • Reduction of the width of the pulleys • High transmission ratio • Long working life of the pulleys with small diameter • Wide field of uses • Reduction of the costs THE PROPERTIES OF THE MATERIAL The special mixture made of polyurethane has got special physical properties much better favourable than the most traditional materials usually used in the manufacturing of belts. As well as the excellent fatigue resistance and wear resistance, and the high friction factor, the polyurethane assures also an excellent ozone resistance, oxidation resistance, mineral oil resistance. The polyurethane enables also to improve the adhesion on the stands, because the belt is obtained by pressure diecasting. THE SPECIAL RIBBING The typical ribbing obtained by melting on the stands in polyamide assures a higher transverse stiffness, without reducing the longitudinal bending capacity. The ribbing makes easer also the draining of the heat of the belt during the working. THE SECTION AND THE ANGLE The high friction factor given by the polyurethane, enables this belt to adopt the angle of 60°. This typical angle enables a better support of the stands in polyamide of traction and the a higher and stable tension. This enables to transmit more power with smaller sections. NOTE We can supply also M.E.C.BELT® POLIFLEXSOSIL MULTIPLE : we suggest however not to go over three components