All A. u. K. Müller catalogues and technical brochures

P. 1

A. u. K. MüllerValves for Vending ApplicationsWater Inlet ValvesApplications►►►►►►01.007.126►Hot / Cold Drink DispensersEspresso MachinesCoffee + Tea BrewersBrewery PlantsBeer Dispense EquipmentTank or Boiler...

P. 2

A. u. K. Müller"Espresso" Valves Series 18.00x+ Push-Fit Fitting System Series FitSys 18These direct acting valves were specially devised for espresso machines.Using the manifold distributor components of our fitting system the valves can begrouped...

P. 3

A. u. K. MüllerPush-Fit Fitting System Series FitSys 18G-connector(reduced orifice optional)The FitSys 18 Push-Fit fitting system is a modular design and is usedas a distribution system in vending and espresso machines, as wellas to connect the 18.00x...

P. 4

A. u. K. MüllerPush-Fit Fitting System Series FitSys 18Possible connection types of the fitting systemTypeAHose stem connectionID tube Ø 6 mm (0.236 inch)BPush-Fit stemØ 4 mm (0.158 inch)(Counterpart of type G) )CPush-Fit stemØ 6 mm...

P. 5

A. u. K. MüllerBoiler Dispense ValvesWater is often heated in a boiler, measured and dispensed directly into a mixingchamber with low pressure (typically < 60 mbar). Specifically for this purposedirect acting boiler dispense valves were devised.The...

P. 1

A. u. K. MüllerValves and Components for the Sanitary SectorApplications►►►►►Wash basinsUrinalsShowersToiletsBathtubs / WhirlpoolsAutomatic taps are widely used in public facilities and are moreand more appearing in...

P. 2

A. u. K. MüllerTo automate a tap three components are needed1. S e n s o rThe basic functions for each application are already built in thecontact free operating infrared sensor and can, if necessary, beadjusted using a remote control.IR-SensorIR-Sensor...

P. 3

A. u. K. MüllerSize does matterSizeThe design of the valves for integration into tap ware has become more compactover time and today allows the tap ware designers far more design possibilities.39.010.12650.007.10050.007.800050-B05TimeWe develop also...

P. 4

A. u. K. MüllerThe valve is not allA smart contact free infrared sensor controls the valve insidethe tap. It detects the presence of the user and, depending onthe application, controls the flow of water stopping it automatically in the case of a...

P. 5

A. u. K. MüllerEspecially designed for use in sanitary tap ware with high water flowThis latching, servo-controlled 2/2-way valve of nominal orifice size 7 mm isspecifically designed for use in battery-powered, electronically controlled tap warewith...

P. 1

A. u. K. MüllerServo-controlled Solenoid ValvesWhen the water supply for devices such as washing machinesor dishwashers is automatically controlled, servo controlledsolenoid valves are used. These are also suitable for thecontrol of drinking water,...

P. 2

A. u. K. MüllerSingle-Chamber Solenoid ValvesValves of this type are usually straight-through or angle valves and can also bedesigned as multi-chamber valves. Depending on the version it can be equippedwith an upstream integrated strainer. By applying...

P. 3

A. u. K. MüllerMulti-Chamber Solenoid Valves2 chambers01.010.21501.010.21601.010.225GeneralTypeSolenoid valveConstruction2/2-way 2-4 chamber valve straight or inlet ninetydegree to outlet, servo-controlledFunctionNC (normally closed)Fitting positionMedia01.013.215Any,...

P. 4

A. u. K. MüllerSpecial Multi-Chamber ValvesFeatures29.007.21529.010.22529.010.226Two valves in series in one housing.29.010.326One upstream valve with twoseparately controllable outlets.DN 729.007.215Strainer locatedin a separatecompartmentStrainer...

P. 5

A. u. K. MüllerAquastop Series 13.007.226Connected between the water supply and a the machine to be filled, the Aquastopprevents water damage to floors and walls in both domestic and commercialproperty.The outer corrugated tube returns even very...

P. 1

A. u. K. MüllerValves for medical applicationsWe enjoy a long established reputation for supplying valves intothe medical industry, particularly for haemodialysis, sterilisationand disinfection applications. These highly sensitive marketsdemand products...

P. 2

A. u. K. MüllerValves for HaemodialysisThis series of valves was developed specifically for use inhaemodialysers and other medical devices and their designrecognises the stringent requirements of medical applications.►►Direct acting 2/2-way...

P. 3

A. u. K. MüllerDrain Valves►►Direct acting 2/2-way solenoid valvesNC (normally closed) orNO (normally open).DN 40, 50 Ø mm (1.57, 1.97 Ø in)Drain valves can be supplied for either normally closed (NC) ornormally open (NO) operation....

P. 4

A. u. K. MüllerPinch ValvesPinch valves are particularly suitable for applications wherehigh levels of hygiene are required.This design is fundamentally different to traditional valves in thata seat and membrane is not necessary. Flow is controlled...

P. 5

A. u. K. Muller GmbH & Co. KGContact Solenoid ValvesControl ValvesSpecial Valves and Systems A. u. K. Muller GmbH & Co. KGDresdener Str. 162D-40595 DiisseldorfTel.:Fax:+49(0)21 1-7391-0+49(0)21 1-7391-28E-Mail:Internet:info@akmueller.dewww.akmueller.deA....

P. 1

A. u. K. MüllerValves for Environmental TechnologyFloat ValvesApplications►►►►Tank fillingRain water collection & utilisationIrrigation systemsWater treatment plantsFloat valves are used in a variety of areas in the field...

P. 2

A. u. K. MüllerFloat Valves Series 21.01x.Valves of this design are single chamber, with either an inlet at ninety degreesto the outlet or with the inlet and outlet in line. The valves have a glass fibrereinforced polyamide body with nominal diameters...

P. 3

A. u. K. MüllerWater Inlet Valves Series 14.025.126Specially designed for use in irrigation, rain water utilisation or water treatmentplants, this 2/2 way servo controlled solenoid valve has an orifice size of 25mm, isnormally closed (NC) and has...

P. 4

A. u. K. Müller© copyright A.u.K. Müller, technical changes reserved4

P. 5

A. u. K. Muller GmbH & Co. KGContact Solenoid ValvesControl ValvesSpecial Valves and Systems A. u. K. Muller GmbH & Co. KGDresdener Str. 162D-40595 DiisseldorfTel.:Fax:+49(0)21 1-7391-0+49(0)21 1-7391-28E-Mail:Internet:info@akmueller.dewww.akmueller.deA....

P. 1

A. u. K. MüllerValves for Agricultural EngineeringApplications►►Systems, machinery and equipment for the dairy industrySystems for automated animal feeding and drinking troughsIn the sector of agricultural engineering technology, our...

P. 2

A. u. K. MüllerDrain Valves (NC/NO)Valves of this type are used to drain low to highly aggressive liquids, in washing orflushing equipment for milk cooling tanks, milking machines and in cleaning anddisinfecting equipment used in the dairy industry.These...

P. 3

A. u. K. MüllerVacuum Controlled Drain ValvesVacuum controlled drain valves are used as a 2/2 or 3/2-way valves with a nominaldiameter of DN 40 in cleaning and disinfection equipment for dairies.They are suitable for controlling low aggressive media,...

P. 4

A. u. K. MüllerVACUMASTER ®The VACUMASTER is used for milking installations with a regulated or unregulated vacuum pump. In the first case the VACUMASTER keeps the milking vacuumconstant within narrow limits (± 1 kPa). In the second case...

P. 5

A. u. K. Muller GmbH & Co. KGContact Solenoid ValvesControl ValvesSpecial Valves and Systems A. u. K. Muller GmbH & Co. KGDresdener Str. 162D-40595 DiisseldorfTel.:Fax:+49(0)21 1-7391-0+49(0)21 1-7391-28E-Mail:Internet:info@akmueller.dewww.akmueller.deA....

P. 1

A. u. K. MüllerInspirational Valve TechnologySolenoid ValvesControl ValvesSpecial Valves and Systems

P. 2

A. u. K. MüllerExpert KnowledgeMore than 60 years of experience...... in valve technologyFrom an initially family business we have grown internationallyinto a respected leading manufacturer of valve technology witharound 170 staff at our location...

P. 3

A. u. K. MüllerInnovationWe provide customized valve solutions...... with advice and ideasTheprocess begins with ideas and specificationrequirements of our customers. We take them up onthat and develop together individual concepts anddesigns using...

P. 4

A. u. K. Muller GmbH & Co. KGContact Solenoid ValvesControl ValvesSpecial Valves and Systems A. u. K. Muller GmbH & Co. KGDresdener Str. 162D-40595 DiisseldorfTel.:Fax:+49(0)21 1-7391-0+49(0)21 1-7391-28E-Mail:Internet:info@akmueller.dewww.akmueller.del£7A....