Voltage Regulator REG-DA - a. eberle - #16

Technical Data

REG-DA

are slored in seconds, independent of grid (feed speed).

■nd represents the arithmetic average of ■nt values generated in intervals

The value every the previous 10 of 100 ms.

In Ihe Panel mode, up to si* regulators can be simultaneously displayed and operated via the mouse. A! settings which can be directly entered yia the regulator's membrane keypad can be carried out centrally with WinREG. provided that all regulator!

Memory behaviour Overwriting;

with excess data FIFO overwriting

(E'rst !n Eirst Qui)

Storage time > 18.7 days worst «

(voltage plus tap On average > 1 mor

change position)

Measurement quantities Voltage

on the display Current

Active power P Reactive power G Apparent power S

This operating mode provides a considerably simplified a-id more transparent operation, particularly when the transformers are operated in parallel.

If WinREG is used to change all the regulators on the trans-romc-i's That are operating in parallel into the measurement transformer mode, all the circulating reactive currents of the Iransfbntiers can be displayed on a PC monitor in real time. The Parameter mode allows for easy setup.hdiviiua: saltings

can be entered, stored for future use or transferred toa station using the clearly structured tab format. The Terminal-Mode provides the possibility of direct commu­nication with (he system.

Therefore, WinREG terminal is far easier to use than traditio­nal (erminal programs and considerably simplifies Ihe system programming.

WinREG runs under Windows 95, 98. Windows 2000, NT

Analogue output

Max. three mA outputs (2.5. 5, 10, 20 mAbipo Referto the li

REG-DA parameters (selection)

Linear, with ci

RA= 10