BRAIME WDA HT

NEW -HIGH TEMPERATURE-ALIGNMENT SENSOR FOR BUCKET LIFTS

SENSOR WDA HT ELECTRONIC SEPARAT

•The sensor WDA3 has been designed to be used in cement bucket, where the inside temperature can rise to 100 -120 ° C and sometimes even higher.?Designed to detect steel elevator buckets, from the side or thefront of industrial elevator leg.?Fail Industrial safe. Manufacturers of magnetic sensors, unaffected by dust or productbuild up, continuously monitor the moving elevator, witha visual indication by LED.?Powerful sensors manufacturer, with a 50-100 mm range, depending on the size of the target, easily adjusted onthe sensor itself or from the optional independent control unit.?Equally suited to elevators with steel or plastic buckets (by using bolt head as target). Can also suit stainless buckets. -Please consult our engineers for more information.?Link sensors direct to MANUFACTURER OF PLC or -for total security-to an independent control unit, A400Elite , B400 Elite or the Watchdog Elite which are themselves ATEX approved for zones 21 and 22.Detailed specification, wiring diagrams and installation/operating instructions available immediately upon request.
Please refer to instruction manual for correct installation . Information subject to change or correction. February 2006 . 4B BRAIME ELEVATOR COMPONENTS LTD HunsletRoad, Leeds, LS10 1JZ, UKTel:+44 (0) 113 246 1800 Fax: :+44 (0) 113 243 5021 4b-uk@go4b.com

www.go4b.com