RODS Rare Earth rod industrial magnets are extremelyefficient at removing fine iron contamination from free flowing products such as sugar, grain, tea, flour, granulate and any other type of powder with a low moisture content. This item can be supplied with blank, tapped or studded end for ease of installation. Rods are particularly useful for thoseengineers who wish to build their own separator units or have severe room restrictions and are not able to accommodate a conventional unit. All product contact parts are manufactured using 316 grade stainless steel. Data sheet 518 STRIP MAGNET These units are extremely versatile and can be placed above conveyors suppliers, at the side of chute work or even placed on finished product outlet points. High intensity Rare Earth Neodymiummagnets are fully encased withina stainless steel shroud allowing the unit to be utilised in wet applications. Deep fields of magnetic energy are emitted from the front face attracting ferrous contamination as it passes the magnetic face. For optimum performance the strip magnet should, if used above a conveyor, be positioned as close to the belt as permissible. The field depth emitted is 80mm. All product contact parts are manufactured using 316 grade stainless steel. Data sheet 508 DRUMMAGNET Drum magnets are ideal for the continuous removal of tramp and fine ferrous contamination from dry bulk materials used in the processing of grain, chemicals, minerals and recycling. The drum should be fitted at the conveyor discharge or ideally directly below a vibratory feed system. High performance Rare Earth magnets are incorporated within a stainless steel, wear resistant drum shell. The drum shell is supported on quality sealed flange professional bearings to ensure smooth, efficient and reliable rotation of the shell around the magnetic element. Data sheet 510 The magnetic separation with the label Ex can be delivered as request with an laboratory ATEX approved for inside zone 20/0 outside 21/1- 22/2. It depends on the model.