15" Touch Chassis C1500SS - 3M Touch Systems - #1

Text version of the page

The Clear Choice for Optics, Reliability, and Ease of Integration 3M™ MicroTouch™ Display C1500SS The 3M MicroTouch Display C1500SS (15”), a robust metal chassis display using 3M's industry-standard surface capacitive touch technology, provides a durable, optically-enhanced, and cost competitive alternative to 5-wire resistive displays used in industrial automation equipment and kiosk enclosures. The C1500SS display offers multiple mounting options to make integration easy and a variety of bezel options for sealing against liquids and other contaminants. A remote on-screen display module helps simplify any changes to the display image during installation or system maintenance. The Clear Choice The C1500SS display utilizes an all-glass surface capacitive touch sensor with the proprietary 3MTM ClearTekTM Hard Coat to deliver superior durability, 91.5% light transmission, 225-nit brightness (with touch screen), 500:1 contrast ratio and an ultra-fast 5.4 millisecond touch contact time. Multiple Mounting and Bezel Options Multiple mounting and bezel options enable customers to meet their application needs at minimal cost. The C1500SS display offers a 75mm VESA pattern to provide arm mounting capability for industrial automation equipment. This minimizes the capital expenditure needed to upgrade equipment with touch. L-brackets (standard) or a VESA mounting bracket (optional) are available for installations requiring the touch display to be fully enclosed. The C1500SS display offers three bezel options. The Slimline bezel is flush with the edges of the display and is ideal for arm-mounted applications. The Contour Flanged bezel provides a lip to cover the air gap between the touch display and the enclosure opening. These two plastic bezels are ideal for solutions that require a NEMA 1 seal rating. The Industrial Flanged bezel, a metal gasketed bezel, enables kiosks or others enclosures to support NEMA 4X / IP66 seal ratings. Feature All-Glass, One-Layer Solution 3M ClearTek Hard Coat Total Touch Solution Benefit • Provides 91.5% light transmission as compared to 80% for certain 5-wire resistive solutions • Unaffected by UV light that can cause degradation of optics and yellowing of film-based touch sensors over time • No moving parts improves reliability • Inherently free from the appearance of “Newton Rings” • Proprietary coating is uniformly heat infused into the glass creating a non-permeable barrier for increased scratch and chemical resistance • Low surface energy coating promotes smooth finger drag • Unaffected by surface contaminants • Unlike other touch display manufacturers that utilize 3rd party touch sensors, electronics, and or software in their design, 3M owns, understands, and warranties the entire system for an unlimited amount of touches for 3 years Recommended Applications • Industrial Automation • Security Systems • Self Service • Point-of-Information (POI) • Hospitality • Home Automation Cost Effective The C1500SS display uses an all-glass touch sensor with no moving parts, whereas 5-wire resistive solutions rely on compressing the top film layer against a conductive coating to recognize touch. Since force is required to activate a resistive touch sensor it is susceptible to mechanical wear and the appearance of “Newton Rings” which can potentially reduce product life and optical performance. The C1500SS touch display operates reliably in the presence of on-screen contaminants and carries a 3-year “unlimited touches” warranty.