3M™ Fastbond™ Adhesives - Brochure - 3M Adhesives - (Version JPG) - Page n° 8 - PDF Catalogue | Technical Documentation

Untitled

3M™ Fastbondd™ Water-based Adhesives at a Glance

Contact Adhesives

Solids Weight (Approx)

Overlap Shear

Strength

(PSI)

75°F 180 (24°C) (82'

Peel Strength

(PIW)

75°F (24°C)

Product/ Color

Application Method

Consistency

30NF/ Green and neutral

Long bonding range with high immédiate bond strength Economical high coverage Meets MIL-A-24179A, Type I

50%

None

Thin liquid

Spray,

roller,

brush

Up to 4 hours

480™

60™

5.9⁽²⁾

Quart, gallon, 5-gallon pail, drum, tote

30H/

Green

High viscosity version of 30NF

for roll coating

50%

None

Medium liquid

Spray, roller, brush, roll coat

Up to 4 hours

480⁽¹⁾

60⁽¹⁾

5.9⁽²

Drum, tote

2000NF/ Black, blue

light orange,

and neutral

Water-dispersed, activated adhesive

Immediate bonding and handling

strength without forced drying

49%

None

Thin liquid

Co-Spray

Up to 2 hours

350⁽¹⁾

50⁽¹⁾

4.1 ⁽

5-gallon box and pail, drum, tote

100/

Lavender

and

neutral

One-part, fast setting with

neoprene base

Bonds many porous substrates

to porous or non-porous

substrates

47%

None

Very thin liquid

Spray

Up to 20

minutes

1.1 ⁽²⁾

5-gallon box and pail, drum, tote

(1) Birch plywood to birch plywood @ 0.1 inches/minute séparation rate. (2) Canvas to cold rolled steel @ 2.0 inches/minute séparation rate.

Insulation and Carpet Adhesives

Product/

Flash

Packaging

Peel

Strength

(PIW)

75°F(24°C)

Sol

Point

Weight

(Closed

Application Method

Bonding Range

Color

Description

Consistency

(Approx.)

Cup)



Insulation Adhesive 49/Clear	• Fasttacking, high performance pressure sensitive adhesive for lightweight materials • Low VOCs • UL component recognition MAGW2file MH 6288	55%	None	Thin	Spray, brush, roller	30 days plus	3.0™	5-gallon box and pail, drum, tote
Pressure Sensitive Adhesive 4224NF/ Blue and clear	• Permanently pressure sensitive with aggressive tack • Plasticizer resistant • Low VOC content	40%	None	Thick liquid	Spray, brush, roller, trowel, coater	30 days plus	4.4 ™	5-gallon pail, drum

(1) Primed polyester to steel @ 2.0 inches/minute separation rate.

Note: The technical information and data on these pages should be considered representative or typical only, and should not be used for specification purposes.

PRODUCT USE: All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M's control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user's method of application. WARRANTY AND LIMITED REMEDY: 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's application. If the 3M product is defective, your exclusive remedy and 3M's and seller's sole obligation will be, at 3M's option, to repair or replace the product or refund the purchase price. LIMITATION OF LIABILITY: Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.

Industrial and Transportation Business Industrial Adhesives and Tapes Division

3M Center Bldg. 21-1W-10

900 Bush Ave.

St. Paul, MN 55144

1-800-362-3550

www.3M.com/adhesives

Fastbond is a trademark of 3M Company.

3M™ Fastbond™ Adhesives - Brochure - 3M Adhesives - #8

Two-component adhesive, Hot-melt, Double sided tape, Polyethylene adhesive tape, Solvent