3-D Modeler
TECHNICAL DATA
Technology
ProductInVision®HR 3-D Modeler system (InVision®HR 3-D Modeler,
software, VisiJet®material starter kit, warranty) ModelerInVision®HR 3-D Modeler MaterialsModel material - VisiJet®HR 200 Support material - VisiJet®S100 SoftwareInVision print client
software Accessories (not included)InVision Finisher
Modeler
TechnologyMulti-Jet Modeling(MJM). Thermal material application, with UV-curing Maximum Build VolumeW127 x D178 x H50 mm (W5.0 x D7 x H2 in) (xyz) Maximum Single Part Size64.5 cm2(xy) x 5 cm (z); 10 in2(xy) x 2 in (z) Resolution656 x 656 x 800 DPI (xyz) CertificationsUL certified, CE marked, CB certified Electrical100-127 VAC, 50/60 Hz, single-phase, 15A; 200-240* VAC, 50Hz, single-phase, 10A; IT Power System Specification Compliant (Nordic countries) Operating Temperature Range18-28 °C (64-82 °F) Noise<60 dBa estimated (at medium fan setting) Printer (Crated) (WDH)371 kg (817 lb) 0.96 x 1.42 x 1.67 m (38 x 56 x 66 in) Printer (Uncrated) (WDH)254 kg (560 lb) 0.77 x 1.24 x 1.48 m (30 x 49 x 58 in)
Interface
Network CompatibilityNetwork ready with 10/100 Ethernet interfaceClient Hardware Recommendation1.8 GHz Pentium IV with 1 GB RAM (with OpenGL supportand minimum 64 mb video RAM) or higher Client Software OS SupportWindows XP Professional/2000/NT 4.0/Me/98 Input Data File Format.stl; .slc
Materials
Material M o del Sup p or t VisiJet®HR 200VisiJet®S100 CompositionAcrylic plasticn/a ColorBlueWhite Case Quantity4 cartridges8 cartridges Net Weight (Approximate)**500 g (1.1 lb)405 g (0.9 lb) Density @ 80 °C (ASTM D4164)1.02 g/cm3n/a Tensile Modulus (ASTM D638)1724 MPa (250KSI)n/a Tensile Strength (ASTM D638)32 MPa(4.7 KSI)n/a Tensile Elongation at Break (ASTM D638)12.3%n/a Flexural Modulus (ASTM D790)1551 MPa (225 KSI)n/aFlexural Strength (ASTM D638)45 MPa (6.6 KSI)n/a
ASTM protocol followed for testing, except RH conditioning, which is not expected to substantially affect results. * Requires a small external transformer (pn 23418-901-00); supplied by 3DSystems in the country kit.**Weights and dimensions are estimated, nominal values and subject to change without notice. Accessory kit shipped separately. For more information about3DSystems, visit us on the web at:
www.3dsystems.com
or contact us at
moreinfo@3dsystems.com
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with enduse. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2007 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. InVision, Visijet and and the 3Dlogo are registered trademarks of 3DSystems, Inc.PN 70858Issue Date - 28 May 07 TRANSFORM YOUR PRODUCTS
