3-D Modeler
TECHNICAL DATA
Technology
ProductInVision®XT 3-D Modeler,
software, VisiJet®material starter kit, warranty TechnologyMulti-Jet Modeling(MJM). Thermal material application, with UV-curing Maximum Model Size W298 x D185 x H203 mm (W11.75 x D7.3 x H8 in) (xyz) Resolution328 x 328 x 606 DPI (xyz) ModelerInVision®3-D Modeler MaterialsModel material - VisiJet®SR 200 Support material - VisiJet®S100 SoftwareInVision® model client
software Modeler
CertificationsUL certified, CE marked, CB certifiedElectrical100-127 VAC, 50/60 Hz, single-phase, 15A; 200-240* VAC, 50 Hz, single-phase, 10A; IT Power System Specification Compliant (Nordic countries) Operating Temperature Range18-28 °C (64-82 °F) Noise<65 dBa estimated (at medium fan setting) Printer (crated) (WDH)371 kg (817 lb)0.96 x 1.42 x 1.67 m (38 x 56 x 66 in)Printer (uncrated) (WDH)254 kg (560 lb)0.72 x 1.23 x 1.45 m (28.3 x 48.6 x 57 in)
Interface
Network CompatibilityNetwork ready with 10/100 Ethernet interface Client Hardware Recommendation (min.)1.8 GHz Pentium IV with 512 MB RAM (with OpenGL ICD) Client Software OS SupportWindows XP Professional/2000/NT 4.0/Me/98Input Data File Format.stl
Materials
Material M o del Sup p or t VisiJet®SR 200VisiJet®S100 CompositionAcrylic plasticn/a ColorWhite, blue or grayWhite Case Quantity8 cartridges/case8 cartridges Net Weight (Approximate)**500 g (1.1 lb)405 g (0.9 lb) Density @ 80 °C (ASTM D4164)1.02 g/cm3n/a Tensile Modulus (ASTM D638)1772 MPa (257KSI)n/a Tensile Strength (ASTM D638)34 MPa(4.9 KSI)n/a Tensile Elongation at Break (ASTM D638)7.3%n/a Flexural Modulus (ASTM D790)1786 MPa (259 KSI)n/aFlexural Strength (ASTM D638)52 MPa (7.5 KSI)n/a
ASTM protocol followed for testing, except RH conditioning, which is not expected to substantially affect results. * Requires a small external transformer (pn 23418-901-00); supplied by 3DSystems in the country kit.**Weights and dimensions are estimated, nominal values and subject to change without notice. Accessory kit shipped separately.
Please contact:
For more information about3DSystems, visit us on the web at:
www.3dsystems.com
or contact us at
moreinfo@3dsystems.com
Warranty/Disclaimer: The performance characteristics of these products may vary according to product application, operating conditions, material combined with, or with enduse. 3D Systems makes no warranties of any type, express or implied, including, but not limited to, the warranties of merchantability or fitness for a particular use.© 2007 by 3D Systems, Inc. All rights reserved. Specifications subject to change without notice. InVision, Visijet and the 3Dlogo are registered trademarks of 3DSystems, Inc.PN 70619Issue Date - 27 Apr 07 TRANSFORM YOUR PRODUCTS
