Text version of the page

fibre made solutions

HiPer-tex™ Fibre made Solutions Add-on armor STANAG 4569 Level 4 HiPer-tex™ fibre passed Stanag 4569 level 4 test (14.5mm API) as a backing for vehicle add-on armour, in combination with TenCate Liba ceramic strike face. 3B the fibreglass company, is continuously working with its partners and customers to develop solutions that meet their needs for high performance, cost effective blast and ballistic protection.The examples shown below are proven HiPer-tex™ solutions, either in stand-alone or combined with ceramic tiles applications; in accord-ance with standards such as MIL-STD, EN-1522 and STANAG-4569.Further information on these solutions is available on request from 3B: The stiffness of HiPer-tex™ fibre -based backing, combined with the elasticity of TenCate Liba ceramic system, enables good multi-impact resistance to be achieved, even when the point of impact is close to the armour’s edge. The vehicle’s steel hull was not perforated and showed very limited damage. Courtesy of TenCate Advanced Armour. 3B.info@3b-fibreglass.com TenCate Liba is patented light weight armour technology based on ceramic pellets embedded in a rubber matrix.

Military Applications:

Spall liner: HiPer-tex™ fibre fabric reinforced phenolic laminate. o Thickness: 0.507 inches - Areal density: 5.4 lbs/sq.ft o Tested at University of Dayton Research Institute, Dayton OH, USA, according to MIL-STD-662 - 7.62 mm FSP o Impact Obliquity 0 degree o Extreme Spread: 53 ft/sec; V50=2455 ft/sec o V50 protection ballistic limit is in accordance with ballistic resistance of MIL-PRF-64154A standard

Paramilitary and Civilian Applications:

Protection against small arms fire o HiPer-tex™ fibre fabric reinforced phenolic laminate. o Thickness: 8.73 mm - Areal density: 18.25 kg/m² o EN-1522 Level FB4 Certified by Banc Officiel d’Epreuve of St Etienne (France)o Courtesy of VonRoll.